Stud Finder App: Wall Scanner

앱 소개

Find the stud before you drill. Stud Finder turns your iPhone's built-in magnetometer into a magnetic stud finder. It picks up the steel nails and screws that hold drywall to the studs, and warns you about the pipes, rebar and conduit you don't want to hit. Lay your phone flat on the wall, let it calibrate, then slide it slowly. The gauge climbs as you get closer to metal, and the scanner lights up, beeps and buzzes when it finds something. THREE SCAN MODES Stud Mode: Tuned for the small, brief signal of a nail or screw. Follow the line of fasteners to find the stud. Metal Mode: Less sensitive, so only larger metal like pipes, plates and steel studs stands out. A line of nails won't set it off, so you can tell a fastener from a pipe. Deep Scan (Pro): The most sensitive mode, for fasteners set deeper in the wall that Stud Mode can pass right over. WALL VIEW (PRO) Found one stud? Point your camera at the wall and Wall View draws a line on it in AR, then marks where the next studs should be at your stud spacing: 16 or 24 inches, or 40 or 60 cm. Slide your phone onto a predicted line to check it, and tap to confirm. Predicted lines are estimates. Doubled studs around doors, wi

할인 기록

Stud Finder App: Wall Scanner은(는) GroveTab에서 2번 할인되었고, 가장 최근은 2026년 11월 1일입니다.

• 앱 내 구입 무료2026년 11월 1일STUDFINDER132
• 앱 내 구입 무료2026년 9월 28일 – 2026년 9월 29일STUDFINDER130